Close
1300 131 788
Close

Our Products

View Product
Therachlor Chlorinator (Residential)
View Product
Therachlor Chlorinator (Commercial)
View Product
Therachlor Controllers
View Product
Theraclear Media Filters
View Product
Theraclear Cartridge Filters
View Product
Theraflo Pool Pump
View Product
Theratherm Heatpump
View Product
Theraclear Glass Filtration Media
View Product
Theracare Start-Up Packages
View Product
Theralux Enhanced Mineral Additive
View Product
Theralux Mineral Test Strip
Enquire Here
Need Help?
Contact Us Today!

Existing Pools

Converting an existing pool to a Theralux Advanced Mineral Pool

You are an existing pool owner and you are wanting to convert your pool into a mineral bathing oasis? The good news is that any pool can be converted to a mineral with the use of Theralux Enhanced Mineral Additive.

01

Simply test and balance your pool water as you have always done using the same sanitizer, keeping within the standard parameters as per Australian Standards (please refer to the table below).

Please note if you are using a salt chlorinator, you must maintain the TDS levels that are recommended by the products manufacturer.

02

Once you are within the parameters and you have the correct TDS levels maintained, simply add in 4kg per 10,000 litres of Theralux Enhanced Mineral Additive and top up the minerals every 5 to 6 months using 2kg per 10,000Litres. You can also check for the mineral strength in your water by using the Theralux Mineral Test Strips. It's that simple.

Water Balance Parameters

What if I am adding Theralux Mineral Additive to an existing chlorine pool or spa?

If your main sanitizer is chlorine, you can still add Theralux Mineral Additive and receive most of the health and wellbeing benefits this product offers. However, you will not receive the added benefit of magnesium hydroxide which is created when water flows across the plates in salt cells (cells are part of a salt chlorination system). Magnesium hydroxide is a water conditioner, sanitizer and also produces a mild flocking agent binding fine particles together enhancing your water quality.

What if I am adding Theralux Mineral Additive to an existing salt chlorinated pool?

If you already operate a salt chlorinator on your pool and wish to use Theralux Enhanced Mineral Additive then this is perfectly ok. You will receive the health and wellbeing benefits however you must maintain the required TDS levels of the chlorinator that you use (please refer to the manufactures guidelines or speak to your local pool shop). The TDS levels are important to maintain as it prevents premature cell wear and allows the chlorinator to effectively run and sanitize your water, keeping the bather safe from bacteria.

To maintain your TDS levels, all you need to do is continue adding sodium to your pool as you have always done and from now you simply just add the Theralux Enhanced Mineral Additive every 5 to 6 months. You can also check for the mineral strength in your water by using the Theralux Mineral Test Strips. It's that simple.

For the True Theralux Mineral Pool Experience

If you are wanting to get a true mineral pool experience and receive the majority of the benefits that a Theralux Mineral Pool offers, we strongly suggest you do the following at a minimum:

01

Ensure your pool has a media filter installed. Most media filters will use sand so you will have to remove this and place in the Theraclear Recycled Glass Media. We recommend contacting one of our Theralux Authorised Diamond Dealers to assist you with this process.

02

Install the Therachlor Chlorinator: Compatible with all salt and mineral water pools operating at a low TDS level of 4000ppm. This is up to a 50% reduction when compared to traditional salt pools. The benefit to you as bather is that it greatly reduces the moisture that is drawn from your body, providing a fresh tasting mineral water that is comforting to your skin. The Therachlor also uses significantly less power saving you on your energy bills.

03

Finish by placing in the appropriate amount of the Theralux Enhanced Mineral Additive. Immerse yourself and enjoy.

Maintaining your Theralux Mineral Pool and topping up with minerals

Maintaining your Theralux Mineral Pool is as simple and cost effective as it gets. By separating the minerals into its own concentrated formula, it allows Theralux to be the least complicated and most economical mineral pool option on the market. Simply test and balance your pool, maintaining all your basic parameters (Total Chlorine, Total Alkalinity, pH, Cyanuric Acid and Calcium Hardness) and ensure a TDS level of at least 4000ppm. We suggest you take a sample of your water into your local pool shop once a month.

Option 1: Top up your pool with Theralux Mineral Additive every 5 to 6 months using 4kg per 10,000Litres.

OR

Option 2: Use the Theralux Mineral Test Strip to get instant result telling you when you need to top up your Theralux pool with minerals.

Theracare Startup Packages Available!

Have you seen our Theracare Startup Package? It is a must have for all new Pool owners. The packs include all your essential startup chemicals, equipment, a robotic pool cleaner, mineral additive discounts and more!

View Packages
Stay up to date